Push to Connect Fitting Elbow, 1/4" Tube OD X 3/8" NPT Male 90 Degree Elbow Adapter 304 Stainless Steel Air Union Fitting
Push to Connect Fitting Elbow, 1/4" Tube OD X 3/8" NPT Male 90 Degree Elbow Adapter 304 Stainless Steel Air Union Fitting
Regular price
$16.38 USD
Regular price
$0.00 USD
Sale price
$16.38 USD
Unit price
/
per
- Type:Push in fitting/Push to connect /Size:1/4 " Tube OD x 3/8" NPT Thread
- Material:304 Stainless Steel. Fluid Admitted:Air Vacuum Water (no freezing)
- Working Pressure:0-3MPa | 0-432psi
- Applicable Tube:PU/PA/PE/PVC
- Working Temperature:-20-200°C | -4~392°F
Product Description
Beduan Push to Connect Fitting Elbow
Type: Push to connect
Size: 1/4 " Tube OD x 1/8" NPT
Fluid Admitted: Air Vacuum Water (no freezing)
Working Pressure: 0-3MPa | 0-435psi
Applicable Tube: PU / PA / PE / PVC
Working Temperature: -4℉~392°F
304 Stainless Steel
- Resistance to high pressure
- Corrosion resistance
- Oxidation resistance
- High temperature resistance
- Good toughness
- Weak magnetic
Product Feature
It can rotate 360° even after Installation. | Bright and clean without blemish. | Easy installation, good sealing, reusable, no air leakage |
Notes for the Connection Of Stainless Steel Quick Connector
- 1.Make sure that the cut surface of the pipe is vertical, that there are no scars around the pipe and that the pipe is not elliptical.
- 2. When inserting the pipe, it must be inserted to the bottom of the connector. If the pipe is not inserted in the end, it may cause air leakage.
- 3. After the pipe is installed, pull the pipe to make sure that the pipe cannot be pulled out.
Installation Method
- After the pipe is cut off, remove the burr and insert one end of the pipe into the socket of the joint (must be inserted into the bottom) to achieve a firm connection and sealing effect.
- After repeatedly pulling out the pipe. The worn part of the end should be cut off. Continue to use after leveling.
- When disassembling the pipe, use your thumb to press the connector ferrule in and gently pull out the pipe.
- After installation, you just need to rotate the joint body to adjust the direction of the pipe.